Breadcrumb
ET-D75LE95 3-Chip DLP™ Projector Ultra Short Throw Lens
ET-D75LE95
Ultra-short-throw lens, compatible with all Panasonic‘s 3-chip DLP™ projectors, enables large-screen projection from a short distance
Key features of ET-D75LE95
Key features
200-inch diagonal image can be produced from a distance of only about 1.5 m (5.0 ft) away from the screen |
Lenses can be used in both vertical and horizontal edge blending |
Throw ratio: 0.39:1 (for 4K+) / 0.36:1 (for the WUXGA & full HD resolution) / 0.39:1 (for the SXGA+ resolution) / 0.40:1 (for the WXGA resolution) |
The World’s Shortest Throw* 3-Chip DLP™ Projector Lens
Compatible with 3-Chip DLP™ Panasonic projectors, the ET-D75LE95/D75LE90 Ultra Short Throw Lens enables large-screen image projection from very short distances.
*Detachable lenses for 3-Chip DLP™ projectors as of November 2016.
Product Overview
By mounting an ET-D75LE95/D75LE90 Ultra Short Throw lens onto a Panasonic 3-Chip DLP™ projector*, throw distances are reduced by as much as 60 % (approximately) in comparison with the ET-75LE50 Short Throw Lens. The huge space lets users exploit the high brightness and picture quality offered by 3-Chip DLP™ Panasonic projectors in spaces where limitations previously existed.
Fit an ET-D75LE95 lens onto one of our 3-Chip DLP™ projectors and produce a 200-inch-diagonal image at a distance** of just 1.6 m (approximately).
Screen sizes of up to 600 inches diagonal are supported. Exclusive technology inside these lenses opens up new possibilities for imaginative visual presentations.
* See specifications for projectors compatible with ET-D75LE95 lens.
** Distance refers to lens tip to screen.
Space-saving Ultra-Short-Throw Lens Delivers High-Brightness Projection
Note: Ensure an unobstructed space of at least 500 mm (1 ft. 8 in.) or more is provided between projector’s rear panel and walls or other structures. If installing in an enclosed space, use of a separate air-conditioning or ventilation system is recommended. If ventilation is insufficient, exhaust heat may accumulate and trip the projector’s protective circuit.
Application Examples
Large On-floor Image Projection
In order to provide sufficient distance to project large images onto floors, major rigging infrastructure, installation on nearby buildings, or special scaffolding is typically required. The ET-D75LE95 makes it possible to project images of the same size from locations nearer the projection plane, greatly simplifying installation.
![ET-D75LE95 (5) 49](/sites/default/files/styles/full_width/public/media/image/2023-03/et-d75le95-5.jpeg)
Projection Mapping
When projecting onto structures that require the unit to be installed close to the projection surface, a short-throw lens alone may not provide sufficient projection distance. By using a projector fitted with an ET-D75LE95 lens and another mounted with an existing optional lens, greater freedom and flexibility of installation is afforded.
![ET-D75LE95 (7) 49](/sites/default/files/styles/full_width/public/media/image/2023-03/et-d75le95-7.jpeg)
Staging
Large-screen projection from ceiling or floor is now possible behind stages where throw distance is limited. A Panasonic 3-Chip DLP™ projector and ET-D75LE95 lens is an ideal combination for enhancing live performances on stage, where high picture quality is demanded.
![ET-D75LE95 (9) 49](/sites/default/files/styles/full_width/public/media/image/2023-03/et-d75le95-9.jpeg)
Exhibition and Simulation
Virtual-reality displays can be achieved in exhibition spaces where possibilities for front-projection were limited, thereby increasing the power of attraction. It’s also possible to combine on-wall projection with units under the floor throwing onto the floor surface, or onto the ceiling, wrapping the viewer in a fully immersive graphical experience.
Digital Signage for Transport Hubs
Projection of large images becomes a reality in places where front-projection was previously limited. Supporting up to 30,000 lumen-class 3-Chip DLP™ projectors, ultra-short-throw lenses are capable of delivering extremely bright pictures even in well-lit environments.
Product gallery
Specifications of ET-D75LE95
Specifications table
F Value | 2.5 |
---|---|
Focal Length (f) | 7.5 mm (9/32") |
Lens Shift | PT-RQ32K/RQ13K | Vertical shift [up: 10% down: 5%] Horizontal shift [left: 21%; right: 21%] |
Lens Shift | PT-RZ31K/RZ12K | Vertical shift [up: 5% down: 5%] Horizontal shift [left: 12%; right: 12%] |
Lens Shift | PT-DZ21K/DZ21K2/DZ13K/DZ10K | Vertical shift [up: 5% down: 7%] Horizontal shift [left: 12%; right: 12%] |
Lens Shift | PT-DZ16K/DZ16K2 | Vertical shift [up: 13% down: 8%] Horizontal shift [left: 19%; right: 19%] |
Lens Shift | PT-RS30K/RS11K | Vertical shift [up: 0% down: 4%] Horizontal shift [left: 8%; right: 8%] |
Lens Shift | PT-DS20K/DS20K2/DS12K | Vertical shift [up: 0% down: 7%] Horizontal shift [left: 8%; right: 8%] |
Share page
Share this link via:
Twitter
LinkedIn
Xing
Facebook
Or copy link: